ACC
The effects of wood extractive on the fixation and leaching of ACC
preservative in Beech (Fagus orientalis Lipsky) wood [Volume 28, SPRING 1, 2013-2014, Pages 62-71]
Acoustic coefficient
The possibility of estimating some of the acoustical properties of particleboards using plate mechanical vibration test [Volume 28, SPRING 1, 2013-2014, Pages 89-96]
Adhesion strength
Improvement of starch adhesive properties used in the carton industry [Volume 28, Summer 2, 2013-2014, Pages 354-363]
Alkali treatment
Effect of bagasse chemical treatment on the mechanical properties
of composites based on treated bagasse/recycled polyethylene [Volume 28, SPRING 1, 2013-2014, Pages 169-181]
Anatomy
Physical and anatomical features and drying behavior of the boards produced from old date palm trees (Phoenix dactylifera L.) in Bam city [Volume 28, Issue 3, 2013-2014, Pages 498-508]
Antioxidant
Evaluation of antioxidant properties and total phenolic and flavonoids content of Eucalyptus camaldulensis and Pinus sylvestris bark [Volume 28, Issue 3, 2013-2014, Pages 522-533]
Astara
Morphological characteristics and chemical components of two corn varieties
(oilseed and 704) stalks cultivated in Astara [Volume 28, Issue 3, 2013-2014, Pages 561-582]
B
Bagasse
Dielectric properties of oil impregnated kraft and soda pulps [Volume 28, Summer 2, 2013-2014, Pages 329-340]
Bagasse
Identification of compounds derived in pyrolysis oils from Oak,
Poplar wood and Bagasse at 573 oK [Volume 28, Issue 3, 2013-2014, Pages 476-488]
Bending Moment Resistance
Investigation on the effect of wooden dowel diameter, penetration depth and species on the bending moment resistance under diagonal tensile load of corner joints in case-type furniture [Volume 28, SPRING 1, 2013-2014, Pages 11-24]
Bethel method
Study on Fire-Retarding Properties of Nano-Wollastonite
in Fir Wood (Abies alba) [Volume 28, Summer 2, 2013-2014, Pages 252-265]
Biofuels
Identification of compounds derived in pyrolysis oils from Oak,
Poplar wood and Bagasse at 573 oK [Volume 28, Issue 3, 2013-2014, Pages 476-488]
BSTFA and GC-MS
Comparative GC/MS analysis of chemical components in wood extracts
of Sweet Locust and False Acacia [Volume 28, Issue 4, 2013-2014, Pages 755-762]
BURST
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013-2014, Pages 451-462]
BURST
Investigation the properties of radiata pine (pinus radiata)
wood kraft pulp and paper [Volume 28, Issue 4, 2013-2014, Pages 685-690]
C
Canola
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013-2014, Pages 463-475]
Canola Stem
Physical and mechanical properties of wood-plastic composite made of
Canola stem residues and polypropylene [Volume 28, Issue 4, 2013-2014, Pages 628-641]
Cationization
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013-2014, Pages 24-34]
CELLULOSE
Preparation of cellulose-nylon composite in liquid phase using macro-waves [Volume 28, Issue 4, 2013-2014, Pages 732-741]
CELL WALL THICKNESS
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013-2014, Pages 182-193]
Chemical components
Morphological characteristics and chemical components of two corn varieties
(oilseed and 704) stalks cultivated in Astara [Volume 28, Issue 3, 2013-2014, Pages 561-582]
Chemical compositions
Comparative study of chemical components and morphological features
of trunk and cone fibers from loblolly pine grown in Gilan province [Volume 28, Issue 3, 2013-2014, Pages 545-560]
Cicer arietinum straw
study on the possibility of particle board tree-layer manufacturing using of Cicer arietinum stem [Volume 28, Summer 2, 2013-2014, Pages 224-237]
CMC
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013-2014, Pages 451-462]
CMC
Optimization of the performance of PAE resin combined with retention
aid and CMC in tissue paper production using deinked pulp [Volume 28, Issue 3, 2013-2014, Pages 489-497]
CMP
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013-2014, Pages 24-34]
Colloidal silica nanoparticles
Effect of colloidal silica nanoparticles produced from rice husk on dimensional stability and water absorption of poplar wood (Populus deltoides) [Volume 28, Issue 4, 2013-2014, Pages 763-773]
Comparative wood anatomy
Comparative wood anatomy of three Ephedra species
(Ephedra procera, Ephedra strobilacea and Ephedra intermedia) of Iran [Volume 28, Issue 4, 2013-2014, Pages 709-719]
Composite
The utilization of two recycled polymers and bagasse fiber in wood
plastic nano / clay composites production [Volume 28, Issue 3, 2013-2014, Pages 435-450]
Composite
Investigation on properties of wood-cement panels based on
Agricultural residues [Volume 28, Issue 3, 2013-2014, Pages 583-896]
Composite
Physical and mechanical properties of wood-plastic composite made of
Canola stem residues and polypropylene [Volume 28, Issue 4, 2013-2014, Pages 628-641]
Composite
Effect of nanoclay-particles on physical and mechanical properties of composites
made of almond shell powder-polypropylene [Volume 28, Issue 4, 2013-2014, Pages 654-671]
Corn stalk
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2013-2014, Pages 608-627]
Correlation Coefficient factor
Detection of defects in joints using the variations in dynamic shear modulus and Correlation Coefficient factor in Beech Wood [Volume 28, Summer 2, 2013-2014, Pages 238-257]
Corrugating board
Improvement of starch adhesive properties used in the carton industry [Volume 28, Summer 2, 2013-2014, Pages 354-363]
Coupling agent
An analysis of the combined effects of isocyanate HMDI and maleic anhydride
(MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite [Volume 28, Summer 2, 2013-2014, Pages 290-300]
Coupling agent
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013-2014, Pages 153-168]
Cutting speed
Different CNC machining condition of paulownia wood by CNC;
Influence on the abbott roughness parameters [Volume 28, Summer 2, 2013-2014, Pages 301-312]
D
Date palm
Physical and anatomical features and drying behavior of the boards produced from old date palm trees (Phoenix dactylifera L.) in Bam city [Volume 28, Issue 3, 2013-2014, Pages 498-508]
Deinking
The effect of poly acrylic acid, sodium salt grafted to poly ethylene oxide complex
on the physical and optical properties of old newsprint paper deinked pulp [Volume 28, Issue 3, 2013-2014, Pages 405-416]
Density
Evaluating the quality of the medium density fiberboard made from kenaf
core and stalk [Volume 28, SPRING 1, 2013-2014, Pages 48-61]
Density
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013-2014, Pages 463-475]
DIAMETER
Investigation on the effect of wooden dowel diameter, penetration depth and species on the bending moment resistance under diagonal tensile load of corner joints in case-type furniture [Volume 28, SPRING 1, 2013-2014, Pages 11-24]
Dimensional stability
Effect of colloidal silica nanoparticles produced from rice husk on dimensional stability and water absorption of poplar wood (Populus deltoides) [Volume 28, Issue 4, 2013-2014, Pages 763-773]
Duncan test
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013-2014, Pages 205-223]
Dynamic shear modulus
Detection of defects in joints using the variations in dynamic shear modulus and Correlation Coefficient factor in Beech Wood [Volume 28, Summer 2, 2013-2014, Pages 238-257]
E
Electron microscope
Effect of nanoclay-particles on physical and mechanical properties of composites
made of almond shell powder-polypropylene [Volume 28, Issue 4, 2013-2014, Pages 654-671]
EPTMAC
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013-2014, Pages 24-34]
Eucalyptus
Utilization of pomegranate tree pruning in the core layer of particleboard
produced from Eucalyptus camedulensis wood [Volume 28, Summer 2, 2013-2014, Pages 381-391]
Eucalyptus
Evaluation of antioxidant properties and total phenolic and flavonoids content of Eucalyptus camaldulensis and Pinus sylvestris bark [Volume 28, Issue 3, 2013-2014, Pages 522-533]
External fibrillation
The effect of fiber external fibrillation on paper properties [Volume 28, SPRING 1, 2013-2014, Pages 1-10]
Extruder
An analysis of the combined effects of isocyanate HMDI and maleic anhydride
(MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite [Volume 28, Summer 2, 2013-2014, Pages 290-300]
F
False acacia
Comparative GC/MS analysis of chemical components in wood extracts
of Sweet Locust and False Acacia [Volume 28, Issue 4, 2013-2014, Pages 755-762]
Feeding rate
Different CNC machining condition of paulownia wood by CNC;
Influence on the abbott roughness parameters [Volume 28, Summer 2, 2013-2014, Pages 301-312]
FIBER LENGTH
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013-2014, Pages 182-193]
Finger joint
Detection of defects in joints using the variations in dynamic shear modulus and Correlation Coefficient factor in Beech Wood [Volume 28, Summer 2, 2013-2014, Pages 238-257]
Fire-Retarding Properties
Study on Fire-Retarding Properties of Nano-Wollastonite
in Fir Wood (Abies alba) [Volume 28, Summer 2, 2013-2014, Pages 252-265]
Fir Wood
Study on Fire-Retarding Properties of Nano-Wollastonite
in Fir Wood (Abies alba) [Volume 28, Summer 2, 2013-2014, Pages 252-265]
Fixation
The effects of wood extractive on the fixation and leaching of ACC
preservative in Beech (Fagus orientalis Lipsky) wood [Volume 28, SPRING 1, 2013-2014, Pages 62-71]
Fixed Bed Reactor
Identification of compounds derived in pyrolysis oils from Oak,
Poplar wood and Bagasse at 573 oK [Volume 28, Issue 3, 2013-2014, Pages 476-488]
Formaldehyde
Evaluation of formaldehyde emissions from composite wood products [Volume 28, Summer 2, 2013-2014, Pages 195-204]
G
Gas chromatography
Identification of compounds derived in pyrolysis oils from Oak,
Poplar wood and Bagasse at 573 oK [Volume 28, Issue 3, 2013-2014, Pages 476-488]
Golestan Province
The manufacture of particleboard using mixture of golestan province wheat straw
and cotton bolls reinforced with nano-clay particles [Volume 28, Summer 2, 2013-2014, Pages 277-289]
H
HDPE
The utilization of two recycled polymers and bagasse fiber in wood
plastic nano / clay composites production [Volume 28, Issue 3, 2013-2014, Pages 435-450]
Household furniture
Identifying and ranking of factors affecting customer satisfaction of
the household wood furniture industry by Multi-Attribute Decision making method
(Case Study: home furniture) [Volume 28, Issue 4, 2013-2014, Pages 691-708]
I
IMPREGNATION
Study on Fire-Retarding Properties of Nano-Wollastonite
in Fir Wood (Abies alba) [Volume 28, Summer 2, 2013-2014, Pages 252-265]
Index
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013-2014, Pages 205-223]
Index
Identifying and ranking of factors affecting customer satisfaction of
the household wood furniture industry by Multi-Attribute Decision making method
(Case Study: home furniture) [Volume 28, Issue 4, 2013-2014, Pages 691-708]
Internal bonding
The effect of fiber external fibrillation on paper properties [Volume 28, SPRING 1, 2013-2014, Pages 1-10]
Internal bonding
The manufacture of particleboard using tannin-modified urea
formaldehyde adhesive [Volume 28, Summer 2, 2013-2014, Pages 266-276]
IPBC
Improvement of the weathering resistance of wood /polyethylene composite using carbamate derivatives (IPBC) and Thiabendazole preservative materials [Volume 28, SPRING 1, 2013-2014, Pages 123-133]
Isocyanate
An analysis of the combined effects of isocyanate HMDI and maleic anhydride
(MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite [Volume 28, Summer 2, 2013-2014, Pages 290-300]
J
Juvenile wood
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013-2014, Pages 182-193]
K
Kenaf bast
The effect of kenaf core and bast mixing on soda pulping
and paper strengths [Volume 28, Issue 4, 2013-2014, Pages 642-653]
KRAFT
Dielectric properties of oil impregnated kraft and soda pulps [Volume 28, Summer 2, 2013-2014, Pages 329-340]
KRAFT PROCESS
Investigation the properties of radiata pine (pinus radiata)
wood kraft pulp and paper [Volume 28, Issue 4, 2013-2014, Pages 685-690]
L
Leaching
The effects of wood extractive on the fixation and leaching of ACC
preservative in Beech (Fagus orientalis Lipsky) wood [Volume 28, SPRING 1, 2013-2014, Pages 62-71]
Lightweight cement blocks
Fabrication of cement blocks using rice husk ash and lignocellulosic fibers [Volume 28, Issue 3, 2013-2014, Pages 393-404]
Likert spectrum
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013-2014, Pages 205-223]
Lumber
Investigation the causal relation of factors influencing on demand for
lumber imports in Iran [Volume 28, SPRING 1, 2013-2014, Pages 134-152]
M
MADM
Identifying and ranking of factors affecting customer satisfaction of
the household wood furniture industry by Multi-Attribute Decision making method
(Case Study: home furniture) [Volume 28, Issue 4, 2013-2014, Pages 691-708]
Mature wood
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013-2014, Pages 182-193]
MECHANICAL PROPERTIES
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013-2014, Pages 153-168]
MECHANICAL PROPERTIES
The effect of paper mill recycling sludge application on the mechanical
properties of composites based on recycled polymers [Volume 28, Issue 3, 2013-2014, Pages 509-521]
MECHANICAL PROPERTIES
The effect of core type and skin on the mechanical properties
of lightweight sandwich Panels [Volume 28, Issue 4, 2013-2014, Pages 720-731]
MEDIUM DENSITY FIBERBOARD
Evaluating the quality of the medium density fiberboard made from kenaf
core and stalk [Volume 28, SPRING 1, 2013-2014, Pages 48-61]
Melamin urea formaldehyde
study on the possibility of particle board tree-layer manufacturing using of Cicer arietinum stem [Volume 28, Summer 2, 2013-2014, Pages 224-237]
Milling
Different CNC machining condition of paulownia wood by CNC;
Influence on the abbott roughness parameters [Volume 28, Summer 2, 2013-2014, Pages 301-312]
Modulus of elasticity
study on the possibility of particle board tree-layer manufacturing using of Cicer arietinum stem [Volume 28, Summer 2, 2013-2014, Pages 224-237]
Modulus of rupture
study on the possibility of particle board tree-layer manufacturing using of Cicer arietinum stem [Volume 28, Summer 2, 2013-2014, Pages 224-237]
MOE
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2013-2014, Pages 608-627]
MOR
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2013-2014, Pages 608-627]
Morphological characteristics
Morphological characteristics and chemical components of two corn varieties
(oilseed and 704) stalks cultivated in Astara [Volume 28, Issue 3, 2013-2014, Pages 561-582]
MUF
The effects of thermal treatment and resin type on physical and
mechanical properties of Kenaf stalk particleboard [Volume 28, Summer 2, 2013-2014, Pages 313-328]
N
Nanoclay
The manufacture of particleboard using mixture of golestan province wheat straw
and cotton bolls reinforced with nano-clay particles [Volume 28, Summer 2, 2013-2014, Pages 277-289]
Nanoclay
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013-2014, Pages 153-168]
Nanoclay
Physico-mechanical and morphological properties
of nanocomposite made from Canola stalk [Volume 28, Issue 4, 2013-2014, Pages 742-754]
Neutral Sulfite Semi Chemical pulp
Effect of alkaline pre-treatment on physical, optical and mechanical properties
of semi-chemical NSSC wheat straw pulp [Volume 28, Summer 2, 2013-2014, Pages 366-380]
Neutral Sulfite Semi Chemical pulp
Comparison of hot water and alkaline pre-treatments on the properties
of wheat straw NSSC pulp [Volume 28, Issue 4, 2013-2014, Pages 774-794]
O
Oak wood
Identification of compounds derived in pyrolysis oils from Oak,
Poplar wood and Bagasse at 573 oK [Volume 28, Issue 3, 2013-2014, Pages 476-488]
Old newspaper
The effect of poly acrylic acid, sodium salt grafted to poly ethylene oxide complex
on the physical and optical properties of old newsprint paper deinked pulp [Volume 28, Issue 3, 2013-2014, Pages 405-416]
Optical properties
The effect of poly acrylic acid, sodium salt grafted to poly ethylene oxide complex
on the physical and optical properties of old newsprint paper deinked pulp [Volume 28, Issue 3, 2013-2014, Pages 405-416]
P
PAE
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013-2014, Pages 451-462]
Particleboard
Evaluation of formaldehyde emissions from composite wood products [Volume 28, Summer 2, 2013-2014, Pages 195-204]
Particleboard
study on the possibility of particle board tree-layer manufacturing using of Cicer arietinum stem [Volume 28, Summer 2, 2013-2014, Pages 224-237]
Particleboard
The manufacture of particleboard using tannin-modified urea
formaldehyde adhesive [Volume 28, Summer 2, 2013-2014, Pages 266-276]
Particleboard
Utilization of pomegranate tree pruning in the core layer of particleboard
produced from Eucalyptus camedulensis wood [Volume 28, Summer 2, 2013-2014, Pages 381-391]
Particleboard
The possibility of estimating some of the acoustical properties of particleboards using plate mechanical vibration test [Volume 28, SPRING 1, 2013-2014, Pages 89-96]
Particleboard
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013-2014, Pages 463-475]
Particleboard
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2013-2014, Pages 608-627]
PHYSICAL
The influence of OCC pulp refining to improve the properties of test liner board [Volume 28, SPRING 1, 2013-2014, Pages 77-88]
PHYSICAL AND MECHANICAL PROPERTIES
Study of utilizing recycled polyvinyl chloride (PVC) in wood-plastic composite [Volume 28, SPRING 1, 2013-2014, Pages 35-47]
PHYSICAL AND MECHANICAL PROPERTIES
Effect of filler material and foaming agent on practical properties
of wood plastic composites [Volume 28, Issue 4, 2013-2014, Pages 597-607]
PHYSICAL AND MECHANICAL PROPERTIES
Preparation of cellulose-nylon composite in liquid phase using macro-waves [Volume 28, Issue 4, 2013-2014, Pages 732-741]
Polypropylene
Physical and mechanical properties of wood-plastic composite made of
Canola stem residues and polypropylene [Volume 28, Issue 4, 2013-2014, Pages 628-641]
Polypropylene
Effect of nanoclay-particles on physical and mechanical properties of composites
made of almond shell powder-polypropylene [Volume 28, Issue 4, 2013-2014, Pages 654-671]
Poplar
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013-2014, Pages 182-193]
Poplar
Effect of colloidal silica nanoparticles produced from rice husk on dimensional stability and water absorption of poplar wood (Populus deltoides) [Volume 28, Issue 4, 2013-2014, Pages 763-773]
Potassium
Comparative analysis of paper properties from rice straw with sodium
and potassium based chemimechanical pulping processes [Volume 28, Issue 3, 2013-2014, Pages 534-544]
Pretreatment
Comparison of hot water and alkaline pre-treatments on the properties
of wheat straw NSSC pulp [Volume 28, Issue 4, 2013-2014, Pages 774-794]
Profilometery
Different CNC machining condition of paulownia wood by CNC;
Influence on the abbott roughness parameters [Volume 28, Summer 2, 2013-2014, Pages 301-312]
Pulp yield
Investigation the properties of radiata pine (pinus radiata)
wood kraft pulp and paper [Volume 28, Issue 4, 2013-2014, Pages 685-690]
R
Recycled paper mill sludge
The effect of paper mill recycling sludge application on the mechanical
properties of composites based on recycled polymers [Volume 28, Issue 3, 2013-2014, Pages 509-521]
Recycled Polyethylene
Effect of bagasse chemical treatment on the mechanical properties
of composites based on treated bagasse/recycled polyethylene [Volume 28, SPRING 1, 2013-2014, Pages 169-181]
Refining
The effect of fiber external fibrillation on paper properties [Volume 28, SPRING 1, 2013-2014, Pages 1-10]
Refining
The influence of OCC pulp refining to improve the properties of test liner board [Volume 28, SPRING 1, 2013-2014, Pages 77-88]
Rice husk
Effect of colloidal silica nanoparticles produced from rice husk on dimensional stability and water absorption of poplar wood (Populus deltoides) [Volume 28, Issue 4, 2013-2014, Pages 763-773]
Rice Husk Ash
Fabrication of cement blocks using rice husk ash and lignocellulosic fibers [Volume 28, Issue 3, 2013-2014, Pages 393-404]
Rice straw
Comparative analysis of paper properties from rice straw with sodium
and potassium based chemimechanical pulping processes [Volume 28, Issue 3, 2013-2014, Pages 534-544]
Rice straw
Investigation on properties of wood-cement panels based on
Agricultural residues [Volume 28, Issue 3, 2013-2014, Pages 583-896]
S
Scarf joint
Detection of defects in joints using the variations in dynamic shear modulus and Correlation Coefficient factor in Beech Wood [Volume 28, Summer 2, 2013-2014, Pages 238-257]
SEM
The utilization of two recycled polymers and bagasse fiber in wood
plastic nano / clay composites production [Volume 28, Issue 3, 2013-2014, Pages 435-450]
Soda pulping
The effect of kenaf core and bast mixing on soda pulping
and paper strengths [Volume 28, Issue 4, 2013-2014, Pages 642-653]
Soybean flour
Effect of filler material and foaming agent on practical properties
of wood plastic composites [Volume 28, Issue 4, 2013-2014, Pages 597-607]
Stationary
Investigation the causal relation of factors influencing on demand for
lumber imports in Iran [Volume 28, SPRING 1, 2013-2014, Pages 134-152]
Strength
Utilization of pomegranate tree pruning in the core layer of particleboard
produced from Eucalyptus camedulensis wood [Volume 28, Summer 2, 2013-2014, Pages 381-391]
Strength
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013-2014, Pages 24-34]
Strength
The influence of OCC pulp refining to improve the properties of test liner board [Volume 28, SPRING 1, 2013-2014, Pages 77-88]
Strength
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013-2014, Pages 463-475]
Strength properties
The utilization of two recycled polymers and bagasse fiber in wood
plastic nano / clay composites production [Volume 28, Issue 3, 2013-2014, Pages 435-450]
Strength properties
Comparison of hot water and alkaline pre-treatments on the properties
of wheat straw NSSC pulp [Volume 28, Issue 4, 2013-2014, Pages 774-794]
Surface roughness
Different CNC machining condition of paulownia wood by CNC;
Influence on the abbott roughness parameters [Volume 28, Summer 2, 2013-2014, Pages 301-312]
Sweet locust
Comparative GC/MS analysis of chemical components in wood extracts
of Sweet Locust and False Acacia [Volume 28, Issue 4, 2013-2014, Pages 755-762]
T
TEAR INDEX
Investigation the properties of radiata pine (pinus radiata)
wood kraft pulp and paper [Volume 28, Issue 4, 2013-2014, Pages 685-690]
Tensile
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013-2014, Pages 451-462]
Thermal treatment
The effects of thermal treatment and resin type on physical and
mechanical properties of Kenaf stalk particleboard [Volume 28, Summer 2, 2013-2014, Pages 313-328]
Thiabendazole
Improvement of the weathering resistance of wood /polyethylene composite using carbamate derivatives (IPBC) and Thiabendazole preservative materials [Volume 28, SPRING 1, 2013-2014, Pages 123-133]
Thickness swelling
The effects of thermal treatment and resin type on physical and
mechanical properties of Kenaf stalk particleboard [Volume 28, Summer 2, 2013-2014, Pages 313-328]
Thickness swelling
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013-2014, Pages 463-475]
Thickness swelling
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2013-2014, Pages 608-627]
Thickness swelling
Physical and mechanical properties of wood-plastic composite made of
Canola stem residues and polypropylene [Volume 28, Issue 4, 2013-2014, Pages 628-641]
Tissue Paper
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013-2014, Pages 451-462]
Tissue Paper
Optimization of the performance of PAE resin combined with retention
aid and CMC in tissue paper production using deinked pulp [Volume 28, Issue 3, 2013-2014, Pages 489-497]
TOPSIS method
Identifying and ranking of factors affecting customer satisfaction of
the household wood furniture industry by Multi-Attribute Decision making method
(Case Study: home furniture) [Volume 28, Issue 4, 2013-2014, Pages 691-708]
U
UF
The effects of thermal treatment and resin type on physical and
mechanical properties of Kenaf stalk particleboard [Volume 28, Summer 2, 2013-2014, Pages 313-328]
V
Vibration
The possibility of estimating some of the acoustical properties of particleboards using plate mechanical vibration test [Volume 28, SPRING 1, 2013-2014, Pages 89-96]
Volume swelling
Study on Fire-Retarding Properties of Nano-Wollastonite
in Fir Wood (Abies alba) [Volume 28, Summer 2, 2013-2014, Pages 252-265]
W
WHEAT STRAW
The manufacture of particleboard using mixture of golestan province wheat straw
and cotton bolls reinforced with nano-clay particles [Volume 28, Summer 2, 2013-2014, Pages 277-289]
WHEAT STRAW
Effect of alkaline pre-treatment on physical, optical and mechanical properties
of semi-chemical NSSC wheat straw pulp [Volume 28, Summer 2, 2013-2014, Pages 366-380]
WHEAT STRAW
Investigation on properties of wood-cement panels based on
Agricultural residues [Volume 28, Issue 3, 2013-2014, Pages 583-896]
WHEAT STRAW
Comparison of hot water and alkaline pre-treatments on the properties
of wheat straw NSSC pulp [Volume 28, Issue 4, 2013-2014, Pages 774-794]
Wood cement
Investigation on properties of wood-cement panels based on
Agricultural residues [Volume 28, Issue 3, 2013-2014, Pages 583-896]
Wooden furniture
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013-2014, Pages 205-223]
WOOD FLOUR
Study of utilizing recycled polyvinyl chloride (PVC) in wood-plastic composite [Volume 28, SPRING 1, 2013-2014, Pages 35-47]
Wood-plastic composite
Study of utilizing recycled polyvinyl chloride (PVC) in wood-plastic composite [Volume 28, SPRING 1, 2013-2014, Pages 35-47]
Wood Plastic Composite
An analysis of the combined effects of isocyanate HMDI and maleic anhydride
(MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite [Volume 28, Summer 2, 2013-2014, Pages 290-300]
Wood Plastic Composite
Physico-mechanical and morphological properties
of nanocomposite made from Canola stalk [Volume 28, Issue 4, 2013-2014, Pages 742-754]
Wood /polyethylene composite
Improvement of the weathering resistance of wood /polyethylene composite using carbamate derivatives (IPBC) and Thiabendazole preservative materials [Volume 28, SPRING 1, 2013-2014, Pages 123-133]
Wood Polymer Composites
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013-2014, Pages 153-168]
Wood radiography
The use of X-ray method to study annual growth variation
of Pinus eldarica [Volume 28, Summer 2, 2013-2014, Pages 341-353]
X
X-Ray Diffraction
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013-2014, Pages 153-168]
X-Ray Diffraction
Effect of nanoclay-particles on physical and mechanical properties of composites
made of almond shell powder-polypropylene [Volume 28, Issue 4, 2013-2014, Pages 654-671]
XRD
The utilization of two recycled polymers and bagasse fiber in wood
plastic nano / clay composites production [Volume 28, Issue 3, 2013-2014, Pages 435-450]